Selenium IDE Script

Owned by Tomasz Mackowski
Last updated: Oct 16, 2024 by Bartosz Komendacki
6 min read

Selenium IDE Script test type allows Int4 APITester to call test scripts created in the Selenium IDE.
Selenium IDE project is saved to local file (*.side) and then imported to Int4 APITester as content of test case of Selenium IDE Script test type.

List of Selenium IDE commands currently supported in Int4 APITester:

Command

WebDriver url

WebDriver http method

Command

WebDriver url

WebDriver http method

New Session

/session

POST

Delete Session

/session/{session id}

DELETE

Navigate To

/session/{session id}/url

POST

Maximize Window

/session/{session id}/window/maximize

POST

Find Element

/session/{session id}/element

POST

Get Element Text

/session/{session id}/element/{element id}/text

GET

Element Click

/session/{session id}/element/{element id}/click

POST

Element Clear

/session/{session id}/element/{element id}/clear

POST

Element Send Keys

/session/{session id}/element/{element id}/value

POST

Top of the screen with Automation Object (AO) ID, description and test type.

Backend Systems

Parameter name

Description

Example

Backend system line for current doc.

This parameter points out the system where the reference backend document is stored. The value should be a system line described in the landscape configuration.

Note:

If Backend system line for the current doc. has the same value as the Backend system line for the reference doc. (for instance, both are S4/HANA) then the RFC connection between the systems will be maintained both in:

a) the original environment of the reference document (for instance, production system)

b) the environment where the current test case execution takes place (for instance, development system) 

If Backend system line for the current doc. is different than the Backend system line for the reference doc. then, the RFC connection will be maintained only in the environment of the current execution (for instance, development system), but for both system lines (like ECC and S4HANA) 

ECC

SAP_ERP

 

Backend system line for reference doc.

This parameter points out the system line where Int4 Suite should create test documents during test case execution. In most cases, reference documents and documents created during current test execution are stored in the same system line. However, suppose Int4 Suite is used in a migration scenario (for example, migration from ECC to S4/HANA). In that case, the documents might be created in the new system and then compared with the references from the old system.

The value should be a system line described in the landscape configuration.

Note:

If Backend system line for the current doc. has the same value as the Backend system line for the reference doc. (for instance, both are S4/HANA) then the RFC connection between the systems will be maintained both in:

a) the original environment of the reference document (for instance, production system)

b) the environment where the current test case execution takes place (for instance, development system) 

If Backend system line for the current doc. is different than the Backend system line for the reference doc. then, the RFC connection will be maintained only in the environment of the current execution (for instance, development system), but for both system lines (like ECC and S4HANA) 

S4HANA

 

Database Validations

Parameter name

Description

Example

Database validation ruleset

Reference database validation ruleset object name.

Database validation ruleset specify how related backend validation should be performed. Specify tables, fields and join conditions for the backend validation.

Buttons allow navigation to the chosen database validation ruleset and creation of a new database validation ruleset
DB Validation Rulesets

GENERIC_SO

Persist reference DB Data

When switched on, DB reference data will be fetched from backend system during test case creation. Otherwise, it will be fetched during test case execution.

Automation Objects | Database Validations

 

Variables

Variables are the container for values that can be used during testing. Each variable contains two values, the one that is calculated based on the reference message/document and the one that is calculated ad-hoc during test case execution.

Variables & Variable processing

Create button allows variable creation.

Parameter name

Description

Example

Name

Variable technical name

VARIABLE_1

Description

Free text for variable description

Variable One

Type

Type of variable processing

Read & Replace

Find message

Custom

Scope

Scope determines the processing of procedures that generate unique values like, e.g., GUID or NUM_RANGE.

  • Test Case Scope - variable is replaced with new values considering values from the currently processed test case. The variable value, which occurs multiple times in the test case payload, is replaced with the same new value. The variable value in different test cases from the currently processed test run is replaced with a new value for each test case.

  • Test Run - variable is replaced with new values considering values from the currently processed test run. The variable value in different test cases from the currently processed test run is replaced with the same new value.

Test Case

Test Run

Execution Settings

Parameter name

Description

Example

Debug Log

Int4 Suite will provide additional, more technical information in Test Execution Report during the running of the test cases if this parameter is set. Therefore, it is recommended to set this option initially and deactivate it when object definition is confirmed after executing the first test cases

 

Display wait popup before validation

Wait Flag indicating if Int4 Suite should stop test case execution after sending test case message to middleware. Int4 Suite will show the confirmation box, and the user will decide to continue. This setting can execute manual follow-up actions before running the next test case or checking the validations.

This setup works only with Execute via SAP GUI option of execution

 

Delay between execution and validation

Parameter name

Description

Example

For each test case

Delay (in seconds) between test case execution ( sending message) and checking the results.

10

Once per test run

Delay (in seconds) between test run execution ( sending messages) and checking the results.

60

Number Ranges

The number ranges allow generating new values for variables. Those values are used to substitute original document numbers or other values in reference messages.

The number range used to replace the source system document number should always be configured to not overwrite the original number. It means that documents generated by Int4 Suite should have their own subset of the original document number. Usually, it might be a subset of the upper limit of the original number range.

It is essential that automated testing with Int4 Suite consume numbers that the source system will generate during manual testing. Additionally, if testing environment data is refreshed from the production system, more documents would be created in the testing environment. If the Int4 Suite number were configured in the same range, it would start creating duplicates.

For example, the original number range for document numbers from the source system is 560000 - 590000. It would be wise to set the Int4 Suite number range from 590000 to 600000. However, suppose the SAP backend system uses an external number range. It is essential to stay in the original range. In that case, the Int4 Suite number range may be set as 585000-590000, which gives space for 5000 testing documents. Using range from upper interval reduces the risk that the number will be overwritten.

Additionally, the good practice is to use prefixes or suffixes that will quickly separate source system documents and the ones created by Int4 Suite. It should always be used when there is no document number validation by the SAP backend.

Each Object Definition can contain an unlimited number of number ranges. This way, each variable declared in an object can use its specific number range.

 

Parameter name

Description

Example

Number range

Provide a name for the number range. This name would be passed as a parameter in variable processing for actions that will generate values from it.

NUM_RAN

Prefix

The alphanumeric characters to be appended at the beginning of the document number to separate original documents from source systems and the one created during Int4 Suite testing (optional).

INT4_

Low value

The first number of our range.

1

High value

The last number of our range.

999999

Current value

When the number range is used during testing, it would increment per each use.

23

Suffix

The alphanumeric characters to be appended at the end of the document number to separate original documents from source systems and the one created during Int4 Suite testing (optional).

_TEST

Add zeros

If this box is checked, zeros will be automatically appended to the beginning of the document number, such as 000500.

 

Incr. per Test Run

If this indicator is selected, the number range is incrementing once per test run. If multiple test cases with the same Automation Object exist in the test run, they will receive the same value.

 

Parameters

To call Selenium IDE scripts from Int4 Suite, additional values have to be provided:

 

Parameter name

Description

Example

HTTP RFC Destination

Type G RFC destination pointing to Selenium WebDriver used to execute the test cases.

 SELENIUM_DEST_HTTP

Selenium command delay (sec)

Delay in seconds used by Int4 APITester after each Selenium command. Useful when testing web pages with low performance and many asynchronous updates.

 1

 

 

© 2017 - 2022 Int4 AG All rights reserved