...
Parameter name | Description | Example |
Integration flow | SAP CPI integration flow ID | PurchaseOrder_Out |
|---|
Parameters
Parameter name | Description | Example | ||
Test Case Creation | ||||
CPI: Block in iFlow to get output payload | ID of the block in iFlow that can be used to get payload after processing from iFlow trace. Multiple IDs can be specified to support one to many scenario or validate multiple processing steps in iFlow | EndEvent_2 | ||
CPI: Attachment Name to get output payload | Attachment Name from which output payload can be fetched | Target_Attachment | ||
CPI: Store ID used to persist message | The name of the store used to persistence the payload. Recommended approach is to use Block IDs instead of Store | BeforeMapping | ||
Child Test Case Automation Object | Automation Object(s) used to link and create child test cases. This parameter allows for automatic creation of linked outbound test cases during save. Following Automation Object types can be used as child: 5 PI E2E Outbound | |||
CPI: Read CPI Headers | Tells the Int4 Suite to read additional technical CPI headers for the request. Default value is ' ' (false). | X | ||
Test Case Execution | ||||
Trigger the output from message control (NAST) | ||||
CPI: Search using parent application ID | Search outbound message using parent application ID - parent needs to be a CPI Inbound test case that is connected via ProcessDirect or JMS with iFlow under CPI Outbound test | |||
CPI: Search using parent correlation ID | Search outbound message using parent correlation ID | |||
Show XML in the original order (unsorted) | This flag determines if the lines of the file in the XML Comparison Report should be displayed in the original order or should be sorted alphabetically for a specific nodes. | Checked or 'X' - payload will not be sorted on the report Unchecked or '' - payload will be sorted alphabetically (default value) | ||
Flat Files Compare with payload validations applied | If this checkbox is checked, Payload Validation rules are applied before files comparison and the match content is replaced by the placeholders. This can in some cases result in better flat file comparison results, especially in case of many missing lines. | |||
Flat File Line Separator | The character used for end-of-line determination in Flat File messages: for example, CLRF - Unix. The parameter is used to display the comparison report better and display the reference and new message line by line. "Carriage Return and New line" character should be stored as CRLF "Line Feed" should be stored as LF (Unix based files) There is no default value, so the parameter is obligatory for CSV files | CLRF | ||
CPI: Externalized Parameter | Int4 Suite can change value of the externalized parameter before triggering a test case and revert the change back after test case execution. For example you can change your regular PROCESSSDIRECT outbound connection to dummy one and prevent sending message to the receiver. Many parameter can be provided for single automation object in form of <ParameterName>=<ParamterValue>
| Receiver1=IFTT_Default_Out |
Backend Systems
...
Parameter name | Description | Example |
Backend system line for current doc. | This parameter points out the system where the reference backend document is stored. The value should be a system line described in the landscape configuration. Note: If Backend system line for the current doc. has the same value as the Backend system line for the reference doc. (for instance, both are S4/HANA) then the RFC connection between the systems will be maintained both in: a) the original environment of the reference document (for instance, production system) b) the environment where the current test case execution takes place (for instance, development system) If Backend system line for the current doc. is different than the Backend system line for the reference doc. then, the RFC connection will be maintained only in the environment of the current execution (for instance, development system), but for both system lines (like ECC and S4HANA) | ECC SAP_ERP |
|---|---|---|
Backend system line for reference doc. | This parameter points out the system line where Int4 Suite should create test documents during test case execution. In most cases, reference documents and documents created during current test execution are stored in the same system line. However, suppose Int4 Suite is used in a migration scenario (for example, migration from ECC to S4/HANA). In that case, the documents might be created in the new system and then compared with the references from the old system. The value should be a system line described in the landscape configuration. Note: If Backend system line for the current doc. has the same value as the Backend system line for the reference doc. (for instance, both are S4/HANA) then the RFC connection between the systems will be maintained both in: a) the original environment of the reference document (for instance, production system) b) the environment where the current test case execution takes place (for instance, development system) If Backend system line for the current doc. is different than the Backend system line for the reference doc. then, the RFC connection will be maintained only in the environment of the current execution (for instance, development system), but for both system lines (like ECC and S4HANA) | S4HANA |
...
Parameter name | Description | Example |
Rule Type | Rule type. Available options:
| Test Case Creation |
|---|---|---|
Rule | Specify scrambling rule name for identification. | NAME |
Method | Choose a scrambling method from a list. Available methods:
| HASH |
Expression Type | Expression type. Available options:
This field is optional for all interfaces where there is a single type of output. However, for interfaces that output might be both XML and flat file, it is mandatory to specify the expression type. | XPath |
Expression | Path pointing to the field/node where the exception should be applied. | //ORDER/DATE/text() (XPATH expression) or START_TAG(BGM+220+)&&END_TAG(+)&& (Flat file expression) or $.order.date (JSONPath expression) REGEX(BGM\+220\+(.*)\+) (REGEX expression) |
Parameter | Specify Processing Parameter suitable for a chosen scrambling method. | X (for Mask method), SHA1 (for HASH Method) |
Parameters
Parameter name
Description
Example
Test Case Creation
CPI: Block in iFlow to get output payload
ID of the block in iFlow that can be used to get payload after processing from iFlow trace.
Multiple IDs can be specified to support one to many scenario or validate multiple processing steps in iFlow
EndEvent_2
CPI: Attachment Name to get output payload
Attachment Name from which output payload can be fetched
Target_Attachment
CPI: Store ID used to persist message
The name of the store used to persistence the payload.
Recommended approach is to use Block IDs instead of Store
BeforeMapping
CPI: Read CPI Headers
Tells the Int4 Suite to read additional technical CPI headers for the request.
Default value is ' ' (false).
X
Test Case Execution
Trigger the output from message control (NAST)
CPI: Search using parent application ID
Search outbound message using parent application ID - parent needs to be a CPI Inbound test case that is connected via ProcessDirect or JMS with iFlow under CPI Outbound test
CPI: Search using parent correlation ID
Search outbound message using parent correlation ID
) |
This flag determines if the lines of the file in the XML Comparison Report should be displayed in the original order or should be sorted alphabetically for a specific nodes.
Checked or 'X' - payload will not be sorted on the report
Unchecked or '' - payload will be sorted alphabetically (default value)
Flat Files Compare with payload validations applied
If this checkbox is checked, Payload Validation rules are applied before files comparison and the match content is replaced by the placeholders. This can in some cases result in better flat file comparison results, especially in case of many missing lines.
Flat File Line Separator
The character used for end-of-line determination in Flat File messages: for example, CLRF - Unix. The parameter is used to display the comparison report better and display the reference and new message line by line.
"Carriage Return and New line" character should be stored as CRLF
"Line Feed" should be stored as LF (Unix based files)
There is no default value, so the parameter is obligatory for CSV files
CLRF
CPI: Externalized Parameter
Int4 Suite can change value of the externalized parameter before triggering a test case and revert the change back after test case execution. For example you can change your regular PROCESSSDIRECT outbound connection to dummy one and prevent sending message to the receiver.
Many parameter can be provided for single automation object in form of <ParameterName>=<ParamterValue>
| Info |
|---|
Changing externalized parameter requires deployment of the iflow so the execution time is longer comparing to regular execution |
XSLT Transformations
XSLT Transformation can be applied on both Input and Output payloads and it is stored in a reference test case of type XSLT Transformation. To call XSLT Transformation during Test Case execution, Test Case number that is of type XSLT Transformation needs to be provided as an input to one of the below parameters.
...